catheterization task trainer

Setup and maintenance

• Make sure that the red valve screw is tightly screwed to the base.

• Fill the base with water. The water should almost completely fill the container and cover the horizontal bar.

• After swapping the genital inserts, double-check if the red pin sits properly inside the silicone.

• If the genital inserts tend to leak before the catheter is inserted, unscrew the red valve screw and check the silicone valve. Add a little bit of lubricant inside it and re-attach it to the base.

• Always lubricate the equipment prior to use. Silicone grease and water-based lubricants (like optilube) work well.

• Store in clean, dry conditions away from heat and direct sunlight; avoid contact with metals, solvents, oils or greases, and strong detergents. When the product is not in use please store it in the carrier case provided.

​

​